We manufacture your WALLSTOXX for you in your desired format. You have the option to choose a complete design or even a section of the image and thus design it completely individually. The minimum size is 1000 mm by 1000 mm, the maximum size depends on the resolution of the image. If you want a larger WALLSTOXX than your picture allows, please just write us a message to contact@wallstoxx.com.

Monitors and printing presses work in different color spaces. In the case of monitors, colors are generated from the primary colors red, green and blue by means of additive color mixing, whereas in the printing process the four primary colors cyan, magenta, yellow and black are used in subtractive color mixing. Unfortunately, the majority of monitors, laptop screens or cell phone displays are not calibrated and deviate from the standard color space "sRGB". For this reason, your designs may also look slightly different from monitor to monitor.

Yes, but please keep in mind that although modern smartphones have a good photo sensor, they tend to produce a lot of noise in low ambient light. Furthermore, it depends on the respective size of the WALLSTOXX.

Your individual WALLSTOXX is delivered in one piece. One of the great advantages, no sheets with butt edges and easy installation.

Since each WALLSTOXX is individually manufactured for you, the production and delivery time is approximately 10 working days from receipt of payment.

The scope of delivery includes your individual WALLSTOXX, assembly instructions and, if desired, the WALLSTOXX EasyKit with a wide range of assembly accessories.

The WALLSTOXX EasyKit is a complete mounting kit for attaching your WALLSTOXX. It contains:

• Paste brush
• Special paste 200g
• Three mounting clips
• Scalpel
• Aluminum ruler

All you need is a bucket and a stirring spoon/whisk (or similar) to mix the paste. Further, before pasting the wall, we recommend that you cover the floor in front of the wall a little.

To achieve an optimal result, the wall should be clean, painted white, level and unpainted. Stains or unevenness, for example from rough plaster, can show through the flexible fabric. However, depending on the design selection, this can also be used as a style element.

You can find illustrated instructions and a video on how to attach them here.{LINK}

You can remove your WALLSTOXX from the wall in one piece. To do this, simply loosen one corner and pull the whole WALLSTOXX off the wall like a sticker.

After removing the WALLSTOXX, the wall may show slight shadows or residues of the paste used. However, these can be easily washed off with a damp cloth.

The WALLSTOXX is designed for indoor use, basement, bathroom or garage are also possible without any problems. Our product is not intended for use in outdoor and wet areas or anywhere where extreme temperatures or humidity could affect the WALLSTOXX.

Yes, in the case of minor soiling, you can remove the stains from your WALLSTOXX with a damp cloth. If this is not successful or if your WALLSTOXX is dirty over a large area, you can also simply wash your WALLSTOXX in your washing machine.

Yes, you can clean your WALLSTOXX in the washing machine, program "cold wash" (20 degrees), without detergent and spin at max. 400 revolutions. Afterwards, you can reattach your WALLSTOXX to the wall directly from the machine, or store it air-dried until the next use. Please note that the WALLSTOXX must not be ironed and is also not suitable for the tumble dryer.

Yes, however, with daily sunbathing, the colors can fade a little over time, as with commercial wallpaper or fabrics.

WALLSTOXX meets the requirements of building material class B1 for flame-retardant building materials according to DIN 4102, Part 1 (May 1998). In addition, WALLSTOXX is demonstrably resistant to cleaning agents and disinfectants.